If you’ve ever had to unclog a drain, you know it’s not a fun task. And if you’ve ever used harsh chemicals to do the job, you know that it can be downright dangerous. But what if there was a way to unclog your drain without using any harsh chemicals?
Well, there is! In this post, we’ll show you how to unclog a drain without using any harsh chemicals. So whether you’re dealing with a clogged sink or a clogged bathtub, we’ve got you covered. Let’s get started!
How To Clear A Clogged Drain With A Plunger
What Is A Plunger?
A plunger is a tool that uses suction to unclog drains. The most common type of plunger is the bellows plunger, which has a soft rubber cup that fits over the drain opening. There is also the flanged plunger, which has an added ring of rubber around the cup. This type of plunger is better suited for toilets because it forms a tighter seal.
How Does It Work?
When used correctly, a plunger can create enough suction to break up and remove the blockage in your drain. The best way to use a plunger is to first wet the cup with hot water and then place it over the drain opening. Make sure you have a good seal before plunging up and down with consistent pressure. It might take several minutes of plunging before you start to see results, but once the blockage starts to loosen, you should be able to clear it completely with a few more pumps.
How To Clear A Clogged Drain With A Wire Hanger
- Start by straightening out the wire hanger. You want it to be as straight as possible.
- Next, bend one end of the wire into a small hook.
- Carefully insert the hooked end of the wire into the drain. Be careful not to scratch the sides of the drain as you do this.
- Once the wire is inserted into the drain, move it around until you feel resistance. This is likely the clog.
- Hook the clog and pull it out of the drain. If it’s really stubborn, you may need to wiggle it back and forth a bit to get it loose.
- Once the clog is removed, flush the drain with hot water to remove any residue.
And that’s it! You’ve successfully cleared your clogged drain using nothing but a wire hanger.
How To Clear A Clogged Drain With Vinegar And Baking Soda
Pour 1/2 cup of baking soda down the drain, followed by 1/2 cup of vinegar.
Plug the drain and let the mixture sit for 30 minutes.
After 30 minutes, pour a pot of boiling water down the drain to flush out the clog.
If your drain is still clogged after following these steps, you may need to call a professional like Fox Plumbing, who provides drain cleaning in Seattle.
How To Clear A Clogged Drain With Boiling Water
- Boil a pot of water on the stove.
- Carefully pour the boiling water down the drain.
- Immediately plug the drain with the plunger and allow the water to sit for 5 minutes.
- Unplug the drain and flush with cold water.
- Pour a pot of boiling water down the drain once a week as preventive maintenance to keep your drains clear.
write a blog post conclusion for the content aboveUnclogging a drain without harsh chemicals can be a daunting task, but it’s not impossible. In this post, we’ve shown you three different ways to unclog your drain using nothing but common household items. So whether you’re dealing with a clogged sink or bathtub, we’ve got you covered. Give one of these methods a try and see which one works best for you.